Below is the Service Engineer position description (which also includes the Service Intern position) with Vericheck.
They are most interested in the Engineering Technology students or those engineering students with a technical background.
Job Description
Job Title: Service Engineer
Summary: Completes repairs, periodic maintenance, installations and field analyst's
duties when necessary in a safe and timely manner by performing the following
duties:
Duties and Responsibilities: Include the following, other duties may be assigned:
1. Follow guidelines of the Service Department within ISO 17025
requirements
2. Assist in assuring that VTS, L. P. and Verichek Technical Services, Inc.
have the capability to perform the services as requested by the customer
3. Train and qualify other service technicians on instrumentation on which
the training service engineer has been previously qualified
4. Conduct routine tasks such as, but not limited to, Periodic Maintenance
(PM), calibrations, check-in, installation and repair of instruments, and
Positive Metal Identification (PMI)
5. Complete required paperwork on customer site and obtaining customer
signature where required
6. Advise customer of any actions that need to be taken to keep the
instrument in good working condition
7. Submit all paperwork maintained by office administration at the end of
each work week
8. Contact main office daily: call in upon arrival at customer site and at
completion of job. Also, report any possible problems or delays in a
timely manner
9. Provide telephone, remote and/or on-site technical support to other
technicians when needed
10. Provide technical support to customers by phone, remote access, or on site
11. Make suggestions for improving methods, procedures, forms, etc.
12. Provide feedback to main office (service coordinator or technology
manager) about all findings at customer site (for example, customer is
planning to buy new equipment, customer specific wishes, upgrading of
equipment, new service contract opportunities, etc.)
13. Comply with company policies and procedures giving special attention to
safety regulations
14. And all other tasks as assigned
Qualifications:
To perform this job successfully, an individual must be able to perform each essential
duty satisfactorily. The requirements listed below are representative of the
knowledge, skill, and/or ability required. Reasonable accommodations may be made
to enable individuals with disabilities to perform the essential functions.
Education/Experience:
1. Two-year degree in electronics and successful completion of VTS or other
recognized calibration training
2. Minimum of two years' experience in metal identification and sorting by one
or more of the following methods, and/or successful completion of
VTS training on one or more lf the following subjects:
a. OES arc/spark spectroscopy
b. Spark testing
c. Chemical spot testing
d. X-ray instruments
3. Working knowledge of steel types and their differences and/or successful
completion of VTS training on this subject
4. Working knowledge of applicable procedures and methods and/or successful
completion of VS training on this subject
5. Familiarity with the requirements of ISO/IEC 17025 and/or successful
completion of VTS or other documented training on this subject
6. Minimum of two years' experience in operation, maintenance,
troubleshooting, repair and programming of optical-emission spectrometers
and/or successful completion of VTS training on this subject
Must have basic knowledge of operation of optical-emission spectrometers, knowledge
of maintenance and troubleshooting of optical-emission spectrometers, calibration,
sample preparation, and basic electrical knowledge
Verichek Technical Services, Inc.
3000 Industrial Boulevard
Bethel Park, PA 15102
P: 412-854-1800
F: 412-854-1898
Forward cover letter and resume to:
Margo Froetschel
Service Coordinator
margo.froetschel@verichek.net
margo.froetschel@verichek.net
